Boost efficiency
Improve efficiency by up to 50% by simply including a 10mm layer of insulation board.
Reduce impact sound
By adding a combination of acoustic layers to your installation can reduce impact sound by 19dB
Control easily
Control large heating systems which exceed 16A with one thermostat by adding a contactor snubber.
Tank with ease
Create the perfect wet room by combining ThermoSphere Membrane with premium tanking accessories.
Strengthen floors
Add rigidity and strength to a timber substrate with coated insulation boards.
Mitigate risk
Adding an extra floor sensor reduces any risk should anything go wrong with the other one.
Uncoated insulation boards
This type of insulation board provides a cost-effective thermal insulation for concrete and screed substrates. They are manufactured from a high-density extruded polystyrene and can be installed using a flexible cement based tile adhesive.
Available in thicknesses of 6mm and 10.5mm.
Coated insulation boards
Coated boards are manufactured from a high-density extruded polystyrene core with a fibreglass reinforced cement coating on both sides which adds rigidity, strength and thermal insulation to a timber substrate. These boards are water resistant and rot proof which makes them a great choice for wet environments such as bathrooms and wet rooms.
Available in thicknesses between 6mm and 50mm.
Buying guide
This guide gives you all the information you need when buying insulation for your underfloor heating project.
Need a snubber?
Use this easy to use calculation to see if the electrical load exceeds 16A. Yes? You'll need a contactor snubber.
Technical information
Easy to find technical datasheets for the complete range of floor heating accessories.